1000 ESFD Brimful 1080 litres Nominal 1026 litres Length 2000mm Width 680mm Height to main lid 1475mm Height overall 1900mm Footprint 1920 x 680mm With a unique rear fitted lid arrangement, the Envirostore Fuel Dispenser makes it easier for the tank to be filled without having to struggle with the hose and pump area at the front. Standard equipment on all 230 volt FULL SPEC Fuel Dispensers Fuel Pump* Flow Meter Apollo Gauge Minimum of 6m of Delivery Hose Auto Shut Off Nozzle Micron Filter All 230 Volt model Fuel Dispensers are now fitted with a light and an electrical connection point as standard.If your Fuel Dispenser has had a light fitted it should only be turned on when the pump is being used. The light is NOT intended for continuous use and must be turned off after pumping has been completed. Standard Fuel Dispenser pumps NOT to be used for Kero or Aviation Fuel. You may want to rearrange the bottom bit so that the optional extras are in one column. Fuel Dispenser Tanks must not be used to dispense Kero or Aviation Fuel. Please note: Electric pumps should NOT be run off a generator and avoid using an extension cable as using either of these methods to power the pump can run the risk of an electric shock, and may affect your warranty in the event of a pump failure. Warranty Details Fuel Dispenser Tanks have a 5 year warranty. Pumps and Filstops carry 1 year warranty. Hoses, nozzles and seals carry a 3 month warranty. Fuel Dispensers should be installed by a suitably qualified electrician.
