Description High-performance cutting oil for the heaviest machining work and higher cutting speeds Safe and efficient to use Optimum results and safety for all materials and applications Longer tool life High corrosion protection Can be welded without advance cleaning for low quantities Can be used as minimum quantity lubricant Optimum performance and best results thanks to specially coordinated components Reliable performance, even on tools with incorrect settings NoticeOil-soaked cleaning cloths should only be stored in non-flammable, self-sealing, tightly sealed, and appropriately labelled containers (BGI 560)! The machining oil is also available as an aerosol under the product name Cut & Cool Drilling and Cutting Oil Perfect – Spray (0893 050 008). The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products. Application areaNon-water-miscible coolant for machining and forming steel, high-alloyed steel, aluminium, non-ferrous base metal, titanium, carbide, cast iron, etc. InstructionsThe product is processed as delivered. Contents 400 ml Container Aerosol can Colour Yellow orange Smell/fragrance Oil Chemical basis Mineral oil with synthetic ester Shelf life from production 24 Month Density 0.835 g/cm³ Density conditions at 20°C Acid-free Yes Chlorine-free Yes Free from heavy metals Yes Min. flashing point 170 °C Silicone-free Yes Resin-free Yes Kinematic oil basis viscosity 25 mm²/s Paint-wetting impairment substances Yes
