Description Outstanding long-term protection and optimum metal surface appearance High layer thickness in first spray pass High degree of safety thanks to optimum weathering protection Minimum amount of time spent, as only one operation is required Good coverage Versatile use with adjustable spray head Large area and minor repairs can be carried out quickly and reliably with the variable spray head. High degree of resistance to running High degree of wear resistance Tested corrosion protection in accordance with DIN Perfect zinc spray, light: 250 hours Perfect zinc spray: 500 hours Can be used for repairs in accordance with DIN EN ISO 1461 Spot weldable NoticePerfect zinc spray and Perfect light zinc spray contain zinc, and therefore offer optimum, active cathodic protection against corrosion. If the surface is damaged, the zinc coating sacrifices itself (sacrificial anode), thereby protecting the metal against rust. The remaining products protect the entire surface against rust. If the surface is damaged, the metal is no longer protected. Not suitable as adhesive base for PU, MS polymer or hybrid sealing compounds. The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products. Application areaFor visual enhancement, repair and protection against corrosion of metallic surfaces. InstructionsThe application surface must be clean, dry and free from grease. Remove rust and old loose paint, then sand and clean. Shake can vigorously for at least 2 minutes before use. Contents 400 ml Chemical basis Modified alkyd resin Colour Zinc, bright Gloss level Glossy Min. curing time 10 h Fully hardening/curing conditions At recommended dry layer thickness Max. curing time 12 h Resistance in salt-spray test 250 h Max. temperature resistance 240 °C Dust-drying time 15 min Dry layer thickness (first back-and-forth motion) 40 µm Conditions for dust-drying time at recommended dry layer thickness Purity rating zinc 99.99 % Coating thickness 40 µm Recoatable/Can be painted over Conditional, preliminary testing required Grip strength conditions at recommended dry layer thickness Substrates with good adhesion Ferrous metals PMMA Polycarbonate Polystyrene Zinc plated surfaces Spot weldable Yes AOX-free Yes Cross-cut test MAN 0-1 Min./max. grip strength 15-20 min Cross-cut test conditions in accordance with DIN 53151 Conditions for resistance in salt-spray test in accordance with DIN 50021 Shelf life from production 24 Month Conditions to maintain shelf life from production at 10°C to 25°C Min. flashing point -42 °C
