Description High-quality rust remover with cracking effect due to extreme cooling and excellent creep properties Cracking effect By cooling the material surface, e.g. on a stud bolt, down to -40°C, micro-fine cracks appear in the corrosion layer at the connection points. These crack open the rust, ensuring better penetration of the active agent. Excellent capillary action In conjunction with the cracking effect, optimum creep properties ensure excellent rust penetration Optimum rust removal Quickly penetrates rust and loosens seized screws Heavily rusted screw connections are loosened without damage Corrosion protection additives for optimum protection Provides lasting protection against further corrosion Resin-free and acid-free Silicone-free Suitable for use with rubber and seals Notice Remove excess material or splashes immediately from sensitive and painted surfaces. Resin- and acid-free Silicone-free The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage/processing conditions. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development. Application areaFor destruction-free loosening of extremely rusty and oxidised screw connections on passenger cars, lorries, agricultural and construction machinery, assemblies and devices InstructionsRemove as much of the coarse soiling as possible. Shake can before use. Spray the seized parts (bolts) directly from a minimum distance and let it take effect for approx. 1-2 minutes. With stubborn parts, repeat the process. Contents 400 ml Container Aerosol can Min. temperature conditions -10 °C Max. temperature conditions 40 °C Conditions for viscosity of oil basis at 40°C Chemical basis Mineral oil Silicone-free Yes Shelf life from production 24 Month AOX-free Yes Resin-free Yes
